selected publications
-
article
- In situ temperature measurement in microfluidics using optical tweezers . Optics & Laser Technology. 166:-. 2023-01-01
- Development of Low-Alloyed Low-Carbon Multiphase Steels under Conditions Similar to Those Used in Continuous Annealing and Galvanizing Lines. Metals. 12:-. 2022-01-01
- Simplified plasma channel formation model for the electrical discharge machining process. International Journal of Advanced Manufacturing Technology. 106:143-153. 2020-01-01
- Analysis and numerical simulation of the structural performance of fused deposition modeling samples with variable infill values. Journal of Engineering Materials and Technology, Transactions of the ASME. 141:-. 2019-01-01
- Performance evaluation of analytical expressions for cylindrical and rectangular deep drawing force estimation. Journal of Manufacturing Processes. 36:340-350. 2018-01-01
- Comparative analysis and evaluation of thermal models of electro discharge machining. International Journal of Advanced Manufacturing Technology. 89:743-754. 2017-01-01
- Numerical prediction of the printable density range of lattice structures for additive manufacturing. Materials and Design. 133:549-558. 2017-01-01
- Modeling of Temperature Cycles Induced by Pico- and Nanosecond Laser Pulses in Zinc Oxide and Molybdenum Thin Films. Journal of Heat Transfer. 138:-. 2016-01-01
- Numerical and theoretical modeling of the elasto-plastic response of aluminum-graphite composites during straining. Materials Science and Engineering A. 650:323-334. 2016-01-01
- A complete structural performance analysis and modelling of hydroxyapatite scaffolds with variable porosity. Computer Methods in Biomechanics and Biomedical Engineering. 18:1225-1237. 2015-01-01
- Study of the effect introduced by an integrating sphere on the temporal profile characterization of short laser pulses propagating through a turbid medium. Applied Optics. 54:2383-2390. 2015-01-01
- Thermal annealing using ultra-short laser pulses to improve the electrical properties of Al:ZnO thin films. Acta Materialia. 98:327-335. 2015-01-01
- Annealing of SnO2 thin films by ultra-short laser pulses. Optics Express. 22:A607-A621. 2014-01-01
- Analysis of the allowable deep drawing height of rectangular steel parts. International Journal of Advanced Manufacturing Technology. 66:371-380. 2013-01-01
- Weld quality analysis and evaluation of plasma arc welds in electrical stators. International Journal of Advanced Manufacturing Technology. 64:737-747. 2013-01-01
- A camera based feedback control strategy for the laser cladding process. Journal of Materials Processing Technology. 212:2455-2462. 2012-01-01
- Ultra-short-pulsed laser-machined nanogratings of laser-induced periodic surface structures on thin molybdenum layers. Journal of Nanophotonics. 6:-. 2012-01-01
- FEM modeling and experimental verification for dilution control in laser cladding. Journal of Materials Processing Technology. 211:187-196. 2011-01-01
- Experimental study on electrodischarge machining in water of D2 tool steel using two different electrode materials. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 223:1423-1430. 2009-01-01
- Experimental observation of keyhole shapes in the laser welding of aluminum blanks. Journal of Laser Applications. 19:245-251. 2007-01-01
- Keyhole shapes during laser welding of thin metal sheets. Journal of Physics D: Applied Physics. 40:5388-5393. 2007-01-01
- Mechanism of drop constriction in a drop-on-demand inkjet system. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 453:2573-2581. 1997-01-01
- Numerical modelling of unsteady 2D sheet cavitation. Houille Blanche. 52:89-95. 1997-01-01
- Sheet cavitation and cloud cavitation, re-entrant jet and three-dimensionality. Flow, Turbulence and Combustion. 58:91-114. 1997-01-01
- Sheet cavitation and cloud cavitation, re-entrant jet and three-dimensionality. Applied Scientific Research (The Hague). 58:91-114. 1997-01-01
-
conference paper
- Análisis y modelado del comportamiento a la fatiga axial de piezas fabricadas por FDM utilizando parámetros de proceso variables . -. 2023-01-01
- Modelos simplificados para el análisis de un manipulador flexible accionado por alambres de aleación con memoria de forma. -. 2023-01-01
- Analysis and numerical simulation of the mechanical performance of FDM samples with variable infill values. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2017-01-01
- Comparative study of analytical expressions to estimate the deep drawing force of cylindrical and rectangular parts. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2016-01-01
- Comparative study of numerical models of the laser forming process. Journal of Laser Applications. -. 2015-01-01
- Development of a virtual platform to evaluate the performance of an electrical vehicle. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2015-01-01
- Analysis of effective mechanical properties and anisotropy of structured porous materials. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- Effect of an integrating sphere measurement on the distortion of a laser pulse propagating through a turbid medium. Progress in Biomedical Optics and Imaging - Proceedings of SPIE. -. 2014-01-01
- Elastoplastic analysis of the Erichsen cupping test using Comsol Multiphysics FEM code. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- Influence of geometrical parameters on the maximum deep drawing height of rectangular parts. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- Numerical simulation of the structural response of Al/Graphite composites using unit cell models and different interface conditions. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- Sheet metal blank development of a deep drawing fan support using theoretical rules and FEM. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- A new method for the generation of tool paths for finishing near net shape components. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2013-01-01
- Analysis of laser welding of different aluminum alloys. ICALEO 2013 - 32nd International Congress on Applications of Lasers and Electro-Optics. 405-414. 2013-01-01
- Elastoplastic analysis of a cantilever beam under combined compressive and bending load. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2013-01-01
- Influence of modeling assumptions on the simulated EDM performance. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2013-01-01
- Optical and electrical properties of SnO2 thin films after ultra-short pulsed laser annealing. Proceedings of SPIE - The International Society for Optical Engineering. -. 2013-01-01
- Structural performance analysis of hydroxyapatite scaffolds for tissue engineering. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2013-01-01
- A case study of drawbead design of a deep drawn rectangular part using FEM. ASME International Mechanical Engineering Congress and Exposition, Proceedings. 21-26. 2010-01-01
- Analysis of the weld quality of plasma arc welds: A case study of conductor welds in an electrical stator. ASME International Mechanical Engineering Congress and Exposition, Proceedings. 437-446. 2010-01-01
- Deep drawing height analysis of rectangular cup drawing. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). 61-68. 2010-01-01
- Failure analysis of a double rectangular deep drawn part using fem: An industrial case. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). 39-46. 2010-01-01
- Investigation of meltpool characteristics and correlations during laser cladding using a finite element modelling approach. 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings. -. 2007-01-01
- Camera based feedback control of the laser cladding process. ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. -. 2006-01-01
- Experimental verification of multi-physical modelling of the keyhole laser welding process. ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. -. 2006-01-01
- Laser propulsion of microelectronic components: Releasing mechanism investigation. Proceedings of SPIE - The International Society for Optical Engineering. -. 2006-01-01
- Optical characteristics of Nd:YAG optics and distortions at high power. 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 - Congress Proceedings. 745-754. 2005-01-01
- Melt ejection during laser drilling. ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. -. 2004-01-01
- Study of laser die release by Q-switched Nd: YAG laser pulses. Proceedings of SPIE - The International Society for Optical Engineering. 935-943. 2004-01-01
- Design of an optical system for high power CO2 laser cutting. ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. -. 2003-01-01
- Modelling and observation of laser welding: The effect of latent heat. ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings. -. 2003-01-01