abstract

• The results of a design study for the optical system for cutting with high power CO2 lasers (6 kW and up) will be presented. As transparent materials cannot be used for these power levels, mirrors have been applied. A coaxial cutting gas supply has been designed with a laser beam entrance into the pressured gas chamber, by means of an intermediate focus. It allows the beam to enter the gas chamber through a small nozzle opening. The final optical system consists of two off-axis aspherical mirrors. In general aspherical elements are very sensitive for positional or angular errors, resulting in considerable astigmatism (basically coma). In addition, unavoidable manufacturing tolerances contribute to deteriorate the optical quality. However, it is shown that the particular combination of two aspherical elements compensate each other, leading to a high quality optical performance, which is virtually independent of the entering beam angle or position. Manufacturing tolerances have been compensated in a one time adjustment during the assembly of the optical system. Preliminary cutting results in 13 mm thick steel in a shipyard application show a significant improvement in the cutting performance.

authors

• De Lange Dirk Frederik
• Meijer J.
• Nielsen J.S.

publication date

• 2003-01-01

published in

• ICALEO 2003 - 22nd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings  Proceedings

keywords

• Carbon dioxide; Carbon dioxide lasers; Fits and tolerances; Laser beams; Manufacture; Mirrors; Ships; Aspherical mirrors; CO2 laser cutting; Cutting performance; Design studies; Manufacturing tolerances; Optical performance; Optical qualities; Transparent material; Optical systems

Digital Object Identifier (DOI)

• 10.2351/1.5059992

start page

end page