selected publications
-
article
- Magnetic interactions in ΔM plots for nanocrystalline Sm-Fe-Ti alloys. Journal of Engineering Research. 3:-. 2023-01-01
- Abrasive wear behavior in dry condition of a plasticity-induced transformation steel. Surface Topography: Metrology and Properties. 10:-. 2022-01-01
- Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys. Journal of Alloys and Compounds. 910:-. 2022-01-01
- Transformation kinetics of a plasticity-induced transformation (TRIP) steel plastically deformed by tension and compression. MRS Advances. 7:1060-1065. 2022-01-01
- 3d-fem simulation of hot rolling process and characterization of the resultant microstructure of a light-weight mn steel. Crystals. 11:-. 2021-01-01
- Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds. 882:-. 2021-01-01
- Caffeine as a source for nitrogen doped graphene, and its functionalization with silver nanowires in-situ. Advances in Nano Research. 9:25-32. 2020-01-01
- Casting and constitutive hot flow behavior of medium-mn automotive steel with nb as microalloying. Metals. 10:-. 2020-01-01
- One-step synthesis of reduced graphene oxide/gold nanoparticles under ambient conditions. Arabian Journal of Chemistry. 13:1633-1640. 2020-01-01
- Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy. Materials Today Communications. 22:-. 2020-01-01
- Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP. Journal of Alloys and Compounds. 800:462-467. 2019-01-01
- Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.%25 ZrO2 Powders by Equal Channel Angular Pressing. Journal of Materials Engineering and Performance. 28:154-161. 2019-01-01
- Green synthesis approximation of Au/Li nanoparticles with Opuntia ficus-indica extract. Physica E: Low-Dimensional Systems and Nanostructures. 108:169-173. 2019-01-01
- Microstructural development and mechanical properties during hot rolling and annealing of an automotive steel combining TRIP/TWIP effects. Journal of Alloys and Compounds. 798:45-52. 2019-01-01
- Properties and arsenic removal evaluation of polyvinyl alcohol nanofibers with embedded strontium hexaferrite nanoparticles. Materials Chemistry and Physics. 234:151-157. 2019-01-01
- Evaluation of the nanostrain caused by incoherent particles in an aluminum–based composite [Evaluación de la nanodeformación causada por partículas incoherentes en un material compuesto base aluminio]. Acta Microscopica. 27:29-36. 2018-01-01
- The use of TTT and CCT phase transformation diagrams to design processing routes of advanced high strength steels [Uso de los diagramas de transformación de fases TTT y CCT para el diseño de rutas de fabricación de aceros avanzados de alta resistencia]. Dyna (Spain). 94:325-331. 2018-01-01
- Comparative study of Oswald ripening and trans-interface diffusion-controlled theory models: Coarsening of γ′ precipitates affected by elastic strain along a concentration gradient. Metals and Materials International. 23:298-307. 2017-01-01
- Evaluation of hardening and softening behaviors in Zn–21Al–2Cu alloy processed by equal channel angular pressing. Journal of Materials Research and Technology. 6:329-333. 2017-01-01
- Consolidation of AA 7075-2 wt%25 ZrO2 composite powders by severe plastic deformation via ECAP. Acta Metallurgica Sinica (English Letters). 29:895-901. 2016-01-01
- Application of ball milling in the synthesis of AA 7075-ZrO2 metal matrix nanocomposite. Powder Technology. 284:40-46. 2015-01-01
- Comparative study of synthesis of AA 7075-ZrO2 metal matrix composite by different mills. Journal of Alloys and Compounds. 643:S107-S113. 2015-01-01
- Fine tuning of magnetite nanoparticle size distribution using dissymmetric potential pulses in the presence of biocompatible surfactants and the electrochemical characterization of the nanoparticles. Materials Science and Engineering C. 46:538-547. 2015-01-01
- Study of Coarsening in γ′ Precipitates by Diffusion Couples. Metallography, Microstructure, and Analysis. 4:467-474. 2015-01-01
- Analysis of ostwald ripening in ni-rich ni-ti alloys by diffusion couples. Bulletin of Materials Science. 37:823-829. 2014-01-01
- Design and optimization of stepped austempered ductile iron using characterization techniques. Materials Characterization. 83:89-96. 2013-01-01
- Mechanical niobium doping in barium titanate electroceramics. Journal of Alloys and Compounds. 581:56-58. 2013-01-01
- Study of phase decomposition and coarsening of γ′ precipitates in Ni-12 at.%25 Ti alloy. Materials Characterization. 83:35-42. 2013-01-01
- Electrochemical synthesis of magnetite and maghemite nanoparticles using dissymmetric potential pulses. Journal of Nanoparticle Research. 14:-. 2012-01-01
- Structural and morphological study of a 2024 Al-Al2O3 composite produced by mechanical alloying in high energy mill. Materials and Design. 37:96-101. 2012-01-01
- Zero-valent iron nanoparticles preparation. Materials Research Bulletin. 47:1478-1485. 2012-01-01
- Temperature effects during Ostwald ripening on structural and bandgap properties of TiO2 nanoparticles prepared by sonochemical synthesis. Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 175:9-13. 2010-01-01
- Coarsening kinetics of coherent precipitates in Fe-10 %25 Ni-15 %25 Al alloy [Cinética de engrosamiento de precipitados coherentes en la aleación Fe-10 %25 Ni-15 %25 Al]. Revista de Metalurgia (Madrid). 44:162-169. 2008-01-01
- BaTiO3 devices doped with Zr using mechanical alloying. Journal of Alloys and Compounds. 434-435:806-808. 2007-01-01
- Micro-Raman analysis of the Si particles present in Al-Si hypereutectic alloys in liquid and semi-solid states. Advanced Engineering Materials. 9:46-51. 2007-01-01
- Stabilization of MgCr 2O 4 spinel in slags of the SiO 2-CaO-MgO-Cr 2O 3 system. Revista de Metalurgia (Madrid). 42:417-424. 2006-01-01
- Coarsening of τ′ precipitates during aging in a Zn-22 wt.%25 Al-2 wt.%25 Cu alloy. Materials Letters. 59:2075-2078. 2005-01-01
- A comparative study of observed and predicted austenite microstructures during hot rolling of a medium carbon steel. ISIJ International. 36:300-309. 1996-01-01
-
chapter
- Evaluation of the hardening and softening effects in Zn–21Al–2Cu with as cast and homogenized microstructure processed by equal channel angular pressing. Minerals, Metals and Materials Series. 689-697. 2017-01-01
-
conference paper
- Precipitation hardening analysis of an Al-8%25Ag alloy. Advanced Materials Research. 154-158. 2014-01-01
- Structure and properties of AA 7075 reinforced with nanometric ZrO 2 obtained by ball-milling. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 2703-2709. 2014-01-01
- Study of coarsening in γ' precipitates by diffusion couples. Microscopy and Microanalysis. 886-887. 2014-01-01
- Precipitation kinetics in a Cu-4 mass%25 Ti alloy. Materials Transactions. 2312-2315. 2004-01-01
- Dissolution of Zr and Y into BaTio3 by milling. Ceramic Engineering and Science Proceedings. 87-94. 2003-01-01
- Preparation and characterization of Cr-O films grown by low-temperature chemical vapor deposition. Materials Science Forum. 353-358. 2002-01-01