Document
type: Class

2020 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2020
publication venue for: Modeling of a Quadratic Buck Converter Based on the R2P2 Concept for PV Applications
type: Information Content Entity
type: Entity
type: Document
type: Continuant
type: Thing
type: Generically Dependent Continuant
type: Book
type: Proceedings

Continuant
type: Class

Entity
type: Class

Modeling of a Quadratic Buck Converter Based on the R2P2 Concept for PV Applications
type: Thing
origen: scopus
type: Document
type: Generically Dependent Continuant
abstract: In photovoltaic systems, it is necessary to have DCDC converters topologies with wide transformation ranges that have the ability to provide output voltages that can be greater or less than the supply voltage by the PV modules. Other aspects that these converters must satisfy are associated to the new requirements of the load consumption. These requirements have been standardized to 48V, 24, 12V and 5V for different applications such as LED lighting, battery banks, amongst others. Also, one important requirement in these systems is that the power processing by the converter must be carried out as efficiently as possible. This paper presents an implemmentation of a quadratic buck converter based on the concept R2P2 as an alternative for photovoltaic applications, where the characteristics of the input current demanded to the panels and the reduction of EMI are improved. In this work, the description of the system formed by the quadratic buck converter R2P2 with an input filter is analyzed, where the requirements of non-pulsating input current and output voltage regulation are satisfied. In addition, the design procedure of the elements that form the converter is developed, as well as the description of the operating modes during the switching process of the converter. Finally, the linear and non-linear models of the converter are presented, as well as some comparative aspects against proposed topologies and the experimental verification. © 2020 IEEE.
has publication venue: 2020 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2020
most specific type: Document
related by: authorship_50058
artnum: 9258753
most specific type: Conference Paper
EI dscopus: 2-s2.0-85097977356
type: Continuant
related by: authorship_50056
freetext keyword: Buck Converter; DC-DC converter; PV applications; Quadratic Converter Photovoltaic cells; Topology; Voltage regulators; Design procedure; Experimental verification; Non-linear model; Output voltage regulation; Photovoltaic applications; Photovoltaic systems; Power processing; Switching process; DC-DC converters
type: Information Content Entity
related by: authorship_50057
doi: 10.1109/ROPEC50909.2020.9258753
estado: published
date time value: conference paper date 7821
type: Entity
related by: authorship_50054
type: Article
crisid: 7821
related by: authorship_50055
type: Conference Paper

Generically Dependent Continuant
type: Class

RDF description of Modeling of a Quadratic Buck Converter Based on the R2P2 Concept for PV Applications - http://orbis.uaslp.mx/vivo/individual/scopus7820
rights: termsOfUse
date: 2026-08-27T06:13:31
publisher: vivo
type: Document

Article
type: Class

Information Content Entity
type: Class

Conference Paper
type: Class