Document
2016 IEEE Conference on Antenna Measurements and Applications, CAMA 2016
This paper presents a corrected electric model for a novel non-contact-type radio-frequency (RF) microelectromechanical systems switch for high frequency applications (f > 24 GHz). This type of switches were proposed in the ref. [1], however in the electric model it is necessary considerer two resistors to have excellent agreement between simulation and experiment results. The proposed switch is a capacitive shunt type operated by the change of capacitance between the signal line and ground lines, the switch consists of a coplanar waveguide line and variable capacitors OFF to the ON state and 200 ps in the ON to the OFF state. The simulation results show a good agreement with our proposed electric circuit of the designed switch and experimental results. © 2016 IEEE.
Coplanar waveguides; Electromechanical devices; MEMS; Microstrip lines; Coplanar waveguide lines; Electric models; High-frequency applications; Non-contact type; Radio frequency microelectromechanical systems; RF-MEMS switches; Two-resistors; Variable capacitor; Electric switches
A corrected model for non-contact-type RF MEMS switches
Generically Dependent Continuant
RDF description of A corrected model for non-contact-type RF MEMS switches - http://orbis.uaslp.mx/vivo/individual/scopus7740
Article
Information Content Entity
Conference Paper