Document
type: Class

Continuant
type: Class

Entity
type: Class

A study of the flow patterns between two corrugated plates with an egg-carton configuration
type: Document
estado: published
related by: authorship_25734
most specific type: Document
crisid: 4397
most specific type: Article
e iscopus: 2-s2.0-85051060355
freetext keyword: 3D laminar flow; Egg-carton corrugated plates; Flow pattern; Numerical analysis; Recirculation Flow patterns; Geometry; Laminar flow; Mixing; Numerical analysis; Numerical methods; Numerical models; Reynolds number; Secondary flow; Three dimensional computer graphics; Complex three dimensional flow; Corrugated plate; Global conver-gence; Local Convergence; Recirculations; Three dimensional (3D) numerical models; Transversal directions; Visualization results; Flow visualization
related by: authorship_25733
date time value: article date 4397
type: Thing
doi: 10.1115/1.4040594
related by: authorship_25736
artnum: 21104
type: Information Content Entity
issue: 2
has funding vehicle: 182300410169, 182102210201
type: Article
abstract: Enhancing mixing in heat exchangers for low Re regimes is vital. A better mixing may be achieved by using corrugated plates. In this work, the flow patterns between corrugated plates with a novel egg-carton geometry were studied. Three-dimensional (3D) numerical models were developed for the steady laminar flow between two corrugated plates having 180 deg or 0 deg phase angles. The Reynolds number (Re 600) was defined as a function of the average distance between the corrugated plates. The numerical models were strictly developed and corroborated to achieve global convergence, local convergence, and grid-size independence. For both phase angles, it was determined that “close recirculations” decrease in size downstream and finally disappear becoming “open recirculations” due to the flow developing characteristics; the secondary flow regions were found to grow downstream; interestingly, increments on the Reynolds number favor recirculation growth and early flow detachment; the behavior and geometry of the recirculation were in line with previous flow visualization results. The recirculations were determined to be z-symmetric with respect to the channel center only for the 180 deg model. The recirculations in the 0 deg model were smaller and became “open recirculations” earlier than in the 180 deg model. Convex geometries on the transversal direction were found to favor detachment, while concave geometries inhibit it. The capability of the numerical methods to track flow paths in any direction showed a complex three-dimensional flow causing 3D-interaction among secondary flows and the main flow not reported before for these channels and just hinted by previous flow visualization studies. Copyright © 2019 by ASME.
type: Generically Dependent Continuant
related by: authorship_25735
has funding vehicle: Foundation of Henan Educational Committee: 16A460001
type: Entity
has publication venue: Journal of Fluids Engineering, Transactions of the ASME
origen: scopus
type: Continuant
volume: 141

Foundation of Henan Educational Committee: 16A460001
type: Relationship
type: BFO_0000020
type: Entity
type: Thing
type: Grant
type: Continuant
funding vehicle for: A study of the flow patterns between two corrugated plates with an egg-carton configuration

182300410169, 182102210201
type: Relationship
type: BFO_0000020
type: Entity
type: Thing
type: Grant
type: Continuant
funding vehicle for: A study of the flow patterns between two corrugated plates with an egg-carton configuration

Generically Dependent Continuant
type: Class

RDF description of A study of the flow patterns between two corrugated plates with an egg-carton configuration - http://orbis.uaslp.mx/vivo/individual/scopus4396
rights: termsOfUse
date: 2026-08-27T06:05:18
publisher: vivo
type: Document

Article
type: Class

Information Content Entity
type: Class

Journal of Fluids Engineering, Transactions of the ASME
type: Generically Dependent Continuant
type: Collection
publication venue for: A study of the flow patterns between two corrugated plates with an egg-carton configuration
type: Thing
type: Information Content Entity
type: Continuant
type: Entity
type: Document
type: Periodical
type: Journal