Document
type: Class

Materials Science Forum
type: Collection
type: Generically Dependent Continuant
type: Entity
type: Periodical
type: Continuant
type: Thing
type: Document
type: Information Content Entity
publication venue for: Dispersion of CNTs in aluminum 2024 alloy by milling process
type: Journal

Continuant
type: Class

Entity
type: Class

Generically Dependent Continuant
type: Class

RDF description of Dispersion of CNTs in aluminum 2024 alloy by milling process - http://orbis.uaslp.mx/vivo/individual/scopus2913
rights: termsOfUse
date: 2026-08-26T03:29:07
publisher: vivo
type: Document

Article
type: Class

Dispersion of CNTs in aluminum 2024 alloy by milling process
type: Document
related by: authorship_17072
type: Generically Dependent Continuant
most specific type: Document
origen: scopus
most specific type: Article
related by: authorship_17071
related by: authorship_17065
related by: authorship_17067
abstract: Elemental powders and carbon nanotubes (CNTs) were mixed and milled in a high energy shaker mill (SPEX-8000M), to produce 2024 aluminum (Al 2024) matrix composites reinforced with CNTs. Milled products were consolidated by uniaxial load pressing followed by pressure-less sintering under argon atmosphere for 2 h at 773 K. The effect of CNTs concentration and milling time on Vickers microhardness (μHV) was studied. Scanning electron microscopy (SEM) micrographs show that by milling process it is possible to obtain a homogeneous dispersion of CNTs into the aluminum matrix. The mechanical properties of the composites show an important improvement with respect to reference samples. The possible strengthening mechanisms are discussed in the present work. © (2011) Trans Tech Publications, Switzerland.
date time value: article date 2914
type: Information Content Entity
page start: 27
related by: authorship_17066
type: Entity
crisid: 2914
volume: 691
estado: published
has publication venue: Materials Science Forum
type: Thing
related by: authorship_17069
doi: 10.4028/www.scientific.net/MSF.691.27
freetext keyword: Aluminum; CNTs; Mechanical alloying; Microhardness test Aluminum; Carbon nanotubes; Dispersions; Mechanical alloying; Microhardness; Milling (machining); Reinforced plastics; Scanning electron microscopy; Sintering; Argon atmospheres; CNTs; Elemental powders; Homogeneous dispersions; Microhardness tests; Pressure-less sintering; Strengthening mechanisms; Vickers microhardness; Aluminum alloys
page end: 31
type: Article
related by: authorship_17068
type: Continuant
related by: authorship_17070
e iscopus: 2-s2.0-79960407819

Information Content Entity
type: Class