Document
Environmental Nanotechnology, Monitoring and Management
Generically Dependent Continuant
Mechanism adsorption analysis during the removal of Cd2%2b and Cu2%2b onto cedar sawdust via experiment coupled with theoretical calculation: Mono- and multicomponent systems
Mechanism adsorption analysis during the removal of Cd2 and Cu2 onto cedar sawdust via experiment coupled with theoretical calculation: Mono- and multicomponent systems
In this work, a deeper comprehension of the adsorption phenomena for Cd2%2b and Cu2%2b occurring in mono- and multicomponent systems on an adsorbent material obtained from cedar sawdust was accomplished by using spectroscopic characterization, and computational tools. The adsorbents were prepared by a simple calcination process at 300, 400, and 500 °C or pyrolysis at 300 °C. The experimental results showed that the adsorption capacity of the CS-C-400 adsorbent is higher for Cd2%2b (36 mg g−1) than Cu2%2b (15 mg g−1) ions in monocomponent systems (50 mg of adsorbent, 50 mL of solution, pH = 5, 25 °C, 200 rpm, and 72 h). In contrast, the trend for the adsorption capacity was Cu2%2b > Cd2%2b in most of the concentrations for multicomponent systems, due to that Cu2%2b showed greater antagonism to Cd2%2b during the competitive adsorption (qCd2%2b was 96 %25 reduced). Computational results correlated well with the experimental ones and evidenced the occurrence of complexation interactions between metal ions and the surface oxygenated functional groups (hydroxyl, carboxyl, ester, and ether) onto the adsorbent surface, as was also proposed through spectroscopy results. Computational and experimental results indicate that Cd2%2b and Cu2%2b adsorption on the adsorbent surface is governed by the occurrence of complexation, and π-cation interaction for both ions, while ionic exchange plays a significant role in Cd2%2b adsorption. © 2022 Elsevier B.V.
Adsorbate-adsorbent interactions; Adsorption; Binary; Cadmium; Copper; Monocomponent
In this work, a deeper comprehension of the adsorption phenomena for Cd2 and Cu2 occurring in mono- and multicomponent systems on an adsorbent material obtained from cedar sawdust was accomplished by using spectroscopic characterization, and computational tools. The adsorbents were prepared by a simple calcination process at 300, 400, and 500 °C or pyrolysis at 300 °C. The experimental results showed that the adsorption capacity of the CS-C-400 adsorbent is higher for Cd2 (36 mg g−1) than Cu2 (15 mg g−1) ions in monocomponent systems (50 mg of adsorbent, 50 mL of solution, pH = 5, 25 °C, 200 rpm, and 72 h). In contrast, the trend for the adsorption capacity was Cu2 > Cd2 in most of the concentrations for multicomponent systems, due to that Cu2 showed greater antagonism to Cd2 during the competitive adsorption (qCd2 was 96 %25 reduced). Computational results correlated well with the experimental ones and evidenced the occurrence of complexation interactions between metal ions and the surface oxygenated functional groups (hydroxyl, carboxyl, ester, and ether) onto the adsorbent surface, as was also proposed through spectroscopy results. Computational and experimental results indicate that Cd2 and Cu2 adsorption on the adsorbent surface is governed by the occurrence of complexation, and π-cation interaction for both ions, while ionic exchange plays a significant role in Cd2 adsorption. © 2022 Elsevier B.V.
RDF description of Mechanism adsorption analysis during the removal of Cd2%2b and Cu2%2b onto cedar sawdust via experiment coupled with theoretical calculation: Mono- and multicomponent systems - http://orbis.uaslp.mx/vivo/individual/scopus10304
Article
Information Content Entity