abstract

• In this paper is presented the optimal design of a switching boost converter based on the reduced redundant power processing (R2P2) principle. Using the NSGA-II optimization method is found a set of optimal combinations for the converter parameters (inductors and capacitors), such that the open loop performance of the converter is improved. The constraints associated to current/voltage ripples and zero-pole locations are used to improve the design. Simulation results show that the optimized converter can be easily controlled with only one control loop. © 2016 IEEE.

authors

• Delgado-Antillón C.P.
• Loera-Palomo R.
• Morales Saldaña Jorge Alberto
• Moreno-Basaldúa E.A.
• Peña Gallardo Rafael

publication date

• 2017-01-01

funding provided via

• Universidad Nacional de San Luis, UNSL  Grant

published in

• 2016 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2016  Proceedings

keywords

• Boost Converter; DC-DC Converter; Design; Optimization Design; Electric inverters; Optimization; Power converters; BOOST converter; Control loop; Optimal combination; Optimal design; Optimization method; Optimized designs; Pole location; Power processing; DC-DC converters

Digital Object Identifier (DOI)

• 10.1109/ROPEC.2016.7830594

start page

end page