Photoluminescence of sol-gel synthesized PZT powders
Article
-
- Overview
-
- Research
-
- Identity
-
- Additional Document Info
-
- View All
-
Overview
abstract
-
A wide band of photoluminescence (PL) emission in structurally disordered lead zirconate titanate (PZT) powders, prepared by sol-gel route, was observed at room temperature excited with a laser line (488 nm). Powders with PbZr0.53Ti0.47O3 nominal composition annealed at different temperatures were studied by X-ray diffraction, Raman spectroscopy, Luminescence, Diffuse Reflectance and Electronic Paramagnetic Resonance Spectroscopy (EPR). Our results indicate that the PL response can be associated to order-disorder degree in the perovskite structure, with the exception of samples annealed at low temperature, where a mixture of oxides precursors׳ phases was observed. Furthermore, in quasi-crystalline ordered samples (95%25 of crystallinity) a small generation of PL remains. In these experiments, the band gap increases with the formation of crystalline structure. EPR experiments were conducted in order to follow the evolution of paramagnetic species with thermal treatment from the mixture of oxides precursors to the perovskite phase and paramagnetic point defects were identified (Pb 3 and Ti 3). EPR data suggest the presence of order-disorder within the lattice network. Paramagnetic species are similar in samples treated at 700 and 800 °C, nevertheless the emission intensity decreases by a factor of 6, indicating that the defects associated with PL are not paramagnetic at both temperatures. © 2016
-
A wide band of photoluminescence (PL) emission in structurally disordered lead zirconate titanate (PZT) powders, prepared by sol-gel route, was observed at room temperature excited with a laser line (488 nm). Powders with PbZr0.53Ti0.47O3 nominal composition annealed at different temperatures were studied by X-ray diffraction, Raman spectroscopy, Luminescence, Diffuse Reflectance and Electronic Paramagnetic Resonance Spectroscopy (EPR). Our results indicate that the PL response can be associated to order-disorder degree in the perovskite structure, with the exception of samples annealed at low temperature, where a mixture of oxides precursors׳ phases was observed. Furthermore, in quasi-crystalline ordered samples (95%25 of crystallinity) a small generation of PL remains. In these experiments, the band gap increases with the formation of crystalline structure. EPR experiments were conducted in order to follow the evolution of paramagnetic species with thermal treatment from the mixture of oxides precursors to the perovskite phase and paramagnetic point defects were identified (Pb%2b3 and Ti%2b3). EPR data suggest the presence of order-disorder within the lattice network. Paramagnetic species are similar in samples treated at 700 and 800 °C, nevertheless the emission intensity decreases by a factor of 6, indicating that the defects associated with PL are not paramagnetic at both temperatures. © 2016
publication date
funding provided via
published in
Research
keywords
-
Diffuse reflectance; EPR; Ferroelectric ceramics; Photoemission; PZT powders; Sol-gel Crystalline materials; Defects; Energy gap; Ferroelectric ceramics; Lead; Mixtures; Paramagnetic resonance; Paramagnetism; Perovskite; Photoemission; Photoluminescence; Point defects; Powders; Reflection; Semiconducting lead compounds; Sol-gel process; Sol-gels; Temperature; Titanium oxides; X ray diffraction; X ray powder diffraction; Crystalline structure; Diffuse reflectance; Electronic paramagnetic resonance spectroscopy; Lead zirconate titanate powder; Paramagnetic species; Perovskite structures; Photoluminescence emission; PZT powders; Electron spin resonance spectroscopy
Identity
Digital Object Identifier (DOI)
Additional Document Info
start page
end page
volume