The rain-triggered Atenquique volcaniclastic debris flow of October 16, 1955 at Nevado de Colima Volcano, Mexico Article uri icon

abstract

  • On October 16, 1955, at 10:45 a.m. (local time), after three days of intense rain (140 mm) that was twice the monthly average precipitation, a devastating flood surge formed a volcaniclastic debris flow on the eastern slopes of Nevado de Colima Volcano. Nearly simultaneous flood surges formed in the Arroyo Seco, Los Platanos, and Dos Volcanes ravines that coalesced with the larger flow in the Atenquique ravine. At each confluence with a tributary, the flow was diluted. The texture and structure of the preserved 1955 deposits near high water marks indicate that the downstream flow was mainly in the lower range of debris flow concentration (60%25 sediment concentration by weight). Downstream the tributaries, the flood encountered a ∼ 0.06 × 106 m3 water reservoir that failed, significantly increasing the surge volume. Additional entrained sediment also increased the flow volume. Downstream, the flood wave reached the town of Atenquique as an 8-9 m catastrophic wave causing the death of more than 23 people, the partial destruction of the town, and losses of ∼ 13,000,000 pesos (∼ 1 million US dollars today) to a paper mill and company facilities. According to eyewitness accounts the flood wave had a peak discharge that lasted ca. 10 to 15 minutes at Atenquique. Deposits at the site and the high-water marks observed from photographs of the town%27s church indicate that sediment concentration was ca. 60 wt.%25. The flood continued for about 1 km to its junction with the Tuxpan River where it was diluted by mixing with normal flood flow. The deposits covered an area of ∼ 1.2 km2 and had a minimum volume of ∼ 3.2 × 106 m3. The main deposit consists of a single unit, averaging 4 m in thickness, with weak textural variations that suggest surging within the flood wave. The deposit is heterolithologic and consists of boulders set in a matrix of sand-size sediment, with polymodal or bimodal distributions and normal grading varying with distance from source. The town of Atenquique has been reconstructed largely within the area inundated by the 1955 flood wave, thus creating the conditions for a future disaster. A rainfall-intensity warning system and an educational program for inhabitants are strategies to mitigate this risk. © 2008 Elsevier B.V. All rights reserved.
  • On October 16, 1955, at 10:45 a.m. (local time), after three days of intense rain (140 mm) that was twice the monthly average precipitation, a devastating flood surge formed a volcaniclastic debris flow on the eastern slopes of Nevado de Colima Volcano. Nearly simultaneous flood surges formed in the Arroyo Seco, Los Platanos, and Dos Volcanes ravines that coalesced with the larger flow in the Atenquique ravine. At each confluence with a tributary, the flow was diluted. The texture and structure of the preserved 1955 deposits near high water marks indicate that the downstream flow was mainly in the lower range of debris flow concentration (60%25 sediment concentration by weight). Downstream the tributaries, the flood encountered a ∼ 0.06 × 106 m3 water reservoir that failed, significantly increasing the surge volume. Additional entrained sediment also increased the flow volume. Downstream, the flood wave reached the town of Atenquique as an 8-9 m catastrophic wave causing the death of more than 23 people, the partial destruction of the town, and losses of ∼ 13,000,000 pesos (∼ 1 million US dollars today) to a paper mill and company facilities. According to eyewitness accounts the flood wave had a peak discharge that lasted ca. 10 to 15 minutes at Atenquique. Deposits at the site and the high-water marks observed from photographs of the town's church indicate that sediment concentration was ca. 60 wt.%25. The flood continued for about 1 km to its junction with the Tuxpan River where it was diluted by mixing with normal flood flow. The deposits covered an area of ∼ 1.2 km2 and had a minimum volume of ∼ 3.2 × 106 m3. The main deposit consists of a single unit, averaging 4 m in thickness, with weak textural variations that suggest surging within the flood wave. The deposit is heterolithologic and consists of boulders set in a matrix of sand-size sediment, with polymodal or bimodal distributions and normal grading varying with distance from source. The town of Atenquique has been reconstructed largely within the area inundated by the 1955 flood wave, thus creating the conditions for a future disaster. A rainfall-intensity warning system and an educational program for inhabitants are strategies to mitigate this risk. © 2008 Elsevier B.V. All rights reserved.

publication date

  • 2008-01-01