selected publications
-
article
- Development of a Novel Heat-Resistant Austenitic Cast Steel with an Improved Thermal Fatigue Resistance. International Journal of Metalcasting. :-. 2022-01-01
- Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys. Journal of Alloys and Compounds. 910:-. 2022-01-01
- High temperature microstructure and mechanical properties of as-cast medium Mn steel with V addition. International Journal of Cast Metals Research. 35:111-120. 2022-01-01
- 3d-fem simulation of hot rolling process and characterization of the resultant microstructure of a light-weight mn steel. Crystals. 11:-. 2021-01-01
- Heat Treatment Optimization of CA-6NM Cast Alloy Using a Full Factorial Design of Experiments Approach. International Journal of Metalcasting. 15:76-87. 2021-01-01
- Influence of process control agent and Al concentration on synthesis and phase stability of a mechanically alloyed AlxCoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds. 882:-. 2021-01-01
- Casting and constitutive hot flow behavior of medium-mn automotive steel with nb as microalloying. Metals. 10:-. 2020-01-01
- Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy. Materials Today Communications. 22:-. 2020-01-01
- Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP. Journal of Alloys and Compounds. 800:462-467. 2019-01-01
- Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.%25 ZrO2 Powders by Equal Channel Angular Pressing. Journal of Materials Engineering and Performance. 28:154-161. 2019-01-01
- Microstructural development and mechanical properties during hot rolling and annealing of an automotive steel combining TRIP/TWIP effects. Journal of Alloys and Compounds. 798:45-52. 2019-01-01
- Evaluation of the nanostrain caused by incoherent particles in an aluminum–based composite [Evaluación de la nanodeformación causada por partículas incoherentes en un material compuesto base aluminio]. Acta Microscopica. 27:29-36. 2018-01-01
- Analysis of Plastic Flow Instability During Superplastic Deformation of the Zn-Al Eutectoid Alloy Modified with 2 wt.%25 Cu. Journal of Materials Engineering and Performance. 26:5304-5311. 2017-01-01
- Comparative study of Oswald ripening and trans-interface diffusion-controlled theory models: Coarsening of γ′ precipitates affected by elastic strain along a concentration gradient. Metals and Materials International. 23:298-307. 2017-01-01
- Evaluation of hardening and softening behaviors in Zn–21Al–2Cu alloy processed by equal channel angular pressing. Journal of Materials Research and Technology. 6:329-333. 2017-01-01
- Consolidation of AA 7075-2 wt%25 ZrO2 composite powders by severe plastic deformation via ECAP. Acta Metallurgica Sinica (English Letters). 29:895-901. 2016-01-01
- Numerical and theoretical modeling of the elasto-plastic response of aluminum-graphite composites during straining. Materials Science and Engineering A. 650:323-334. 2016-01-01
- Application of ball milling in the synthesis of AA 7075-ZrO2 metal matrix nanocomposite. Powder Technology. 284:40-46. 2015-01-01
- Comparative study of synthesis of AA 7075-ZrO2 metal matrix composite by different mills. Journal of Alloys and Compounds. 643:S107-S113. 2015-01-01
- Study of Coarsening in γ′ Precipitates by Diffusion Couples. Metallography, Microstructure, and Analysis. 4:467-474. 2015-01-01
- Design and optimization of stepped austempered ductile iron using characterization techniques. Materials Characterization. 83:89-96. 2013-01-01
- Study of phase decomposition and coarsening of γ′ precipitates in Ni-12 at.%25 Ti alloy. Materials Characterization. 83:35-42. 2013-01-01
- Evaluation of strain caused by coherent precipitates in an Al alloy using TEM techniques. Materials Characterization. 73:61-67. 2012-01-01
- Structural and morphological study of a 2024 Al-Al2O3 composite produced by mechanical alloying in high energy mill. Materials and Design. 37:96-101. 2012-01-01
- Study of microstructural evolution and mechanical properties exhibited by non alloyed ductile iron during conventional and stepped austempering heat treatment. Materials and Design. 32:4756-4762. 2011-01-01
- Synthesis of graphite reinforced aluminum nanocomposite by mechanical alloying. Materials Transactions. 51:1120-1126. 2010-01-01
-
chapter
- Evaluation of the hardening and softening effects in Zn–21Al–2Cu with as cast and homogenized microstructure processed by equal channel angular pressing. Minerals, Metals and Materials Series. 689-697. 2017-01-01
-
conference paper
- Computational simulation of dynamic recrystallization and severe deformation of AA7075 alloy. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2017-01-01
- Numerical simulation of the structural response of Al/Graphite composites using unit cell models and different interface conditions. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). -. 2014-01-01
- Precipitation hardening analysis of an Al-8%25Ag alloy. Advanced Materials Research. 154-158. 2014-01-01
- Structure and properties of AA 7075 reinforced with nanometric ZrO 2 obtained by ball-milling. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 2703-2709. 2014-01-01
- Study of coarsening in γ' precipitates by diffusion couples. Microscopy and Microanalysis. 886-887. 2014-01-01
- Study of coherence strain of GP II zones in an aged aluminum composite. Journal of Alloys and Compounds. S159-S164. 2012-01-01
- Synthesis by powder metallurgy and hot extrusion of 2024 Al alloy with 1 and 2 wt%25 of Al2O3 nanoparticles as reinforcement. Materials Science and Technology Conference and Exhibition 2010, MS and T'10. 2064-2074. 2010-01-01